Install Elasticsearch with Windows MSI Installer

edit

Install Elasticsearch with Windows MSI Installer

edit

This functionality is in beta and is subject to change. The design and code is less mature than official GA features and is being provided as-is with no warranties. Beta features are not subject to the support SLA of official GA features.

Elasticsearch can be installed on Windows using the .msi package. This can install Elasticsearch as a Windows service or allow it to be run manually using the included elasticsearch.exe executable.

Elasticsearch has historically been installed on Windows using the .zip archive. You can continue using the .zip approach if you prefer.

The latest stable version of Elasticsearch can be found on the Download Elasticsearch page. Other versions can be found on the Past Releases page.

Elasticsearch requires Java 8 or later. Use the official Oracle distribution or an open-source distribution such as OpenJDK.

Download the .msi package

edit

Download the .msi package for Elasticsearch v5.5.3 from https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-5.5.3.msi

Install using the graphical user interface (GUI)

edit

Double-click the downloaded .msi package to launch a GUI wizard that will guide you through the installation process. You can view help on any step by clicking the ? button, which reveals an aside panel with additional information for each input:

msi installer help

Within the first screen, select the directory for the installation. In addition, select directories for where data, logs and configuration will reside or roll with the default locations:

msi installer locations

Then select whether to install as a service or start Elasticsearch manually as needed. When installing as a service, you can also decide which account to run the service under as well as whether the service should be started after installation and when Windows is started or restarted:

msi installer service

When selecting an account to run the service with, be sure that the chosen account has sufficient privileges to access the installation and other deployment directories chosen.

Common configuration settings are exposed within the Configuration section, allowing the cluster name, node name and roles to be set, in addition to memory and network settings:

msi installer configuration

Finally, the installer provides a list of common plugins that can be downloaded and installed as part of the installation:

msi installer selected plugins

X-Pack includes a trial license for 30 days. After that, you can obtain one of the available subscriptions or disable Security. The Basic license is free and includes the Monitoring extension.

After clicking the install button, Elasticsearch will be installed:

msi installer success

Install using the command line

edit

The .msi can also install Elasticsearch using the command line. The simplest installation using the same defaults as the GUI is achieved by first navigating to the download directory, then running:

msiexec.exe /i elasticsearch-5.5.3.msi /qn

By default, msiexec does not wait for the installation process to complete, since it runs in the Windows subsystem. To wait on the process to finish and ensure that %ERRORLEVEL% is set accordingly, it is recommended to use start /wait to create a process and wait for it to exit

start /wait msiexec.exe /i elasticsearch-5.5.3.msi /qn

As with any MSI installation package, a log file for the installation process can be found within the %TEMP% directory, with a randomly generated name adhering to the format MSI<random>.LOG. The path to a log file can be supplied using the /l command line argument

start /wait msiexec.exe /i elasticsearch-5.5.3.msi /qn /l install.log

Supported Windows Installer command line arguments can be viewed using

msiexec.exe /help

or by consulting the Windows Installer SDK Command-Line Options.

Command line options

edit

All settings exposed within the GUI are also available as command line arguments (referred to as properties within Windows Installer documentation) that can be passed to msiexec:

INSTALLDIR

The installation directory. Defaults to %ProgramW6432%\Elastic\Elasticsearch

DATADIRECTORY

The directory in which to store your data. Defaults to %ALLUSERSPROFILE%\Elastic\Elasticsearch\data

CONFIGDIRECTORY

The directory in which to store your configuration. Defaults to %ALLUSERSPROFILE%\Elastic\Elasticsearch\config

LOGSDIRECTORY

The directory in which to store your logs. Defaults to %ALLUSERSPROFILE%\Elastic\Elasticsearch\logs

PLACEWRITABLELOCATIONSINSAMEPATH

Whether the data, configuration and logs directories should be created under the installation directory. Defaults to false

INSTALLASSERVICE

Whether Elasticsearch is installed and configured as a Windows Service. Defaults to true

STARTAFTERINSTALL

Whether the Windows Service is started after installation finishes. Defaults to true

STARTWHENWINDOWSSTARTS

Whether the Windows Service is started when Windows is started. Defaults to true

USELOCALSYSTEM

Whether the Windows service runs under the LocalSystem Account. Defaults to true

USENETWORKSERVICE

Whether the Windows service runs under the NetworkService Account. Defaults to false

USEEXISTINGUSER

Whether the Windows service runs under a specified existing account. Defaults to false

USER

The username for the account under which the Windows service runs. Defaults to ""

PASSWORD

The password for the account under which the Windows service runs. Defaults to ""

CLUSTERNAME

The name of the cluster. Defaults to elasticsearch

NODENAME

The name of the node. Defaults to %COMPUTERNAME%

MASTERNODE

Whether Elasticsearch is configured as a master node. Defaults to true

DATANODE

Whether Elasticsearch is configured as a data node. Defaults to true

INGESTNODE

Whether Elasticsearch is configured as an ingest node. Defaults to true

SELECTEDMEMORY

The amount of memory to allocate to the JVM heap for Elasticsearch. Defaults to 2048. If the target machine has less than 4GB in total, defaults to 50% of total memory.

LOCKMEMORY

Whether bootstrap.memory_lock should be used to try to lock the process address space into RAM. Defaults to false

UNICASTNODES

A comma separated list of hosts in the form host:port or host to be used for unicast discovery. Defaults to ""

MINIMUMMASTERNODES

The minimum number of master-eligible nodes that must be visible in order to form a cluster. Defaults to ""

NETWORKHOST

The hostname or IP address to bind the node to and publish (advertise) this host to other nodes in the cluster. Defaults to ""

HTTPPORT

The port to use for exposing Elasticsearch APIs over HTTP. Defaults to 9200

TRANSPORTPORT

The port to use for internal communication between nodes within the cluster. Defaults to 9300

PLUGINS

A comma separated list of the plugins to download and install as part of the installation. Defaults ""

To pass a value, simply append the property name and value using the format <PROPERTYNAME>="<VALUE>" to the installation command. For example, to use a different installation directory to the default one and to install X-Pack:

start /wait msiexec.exe /i elasticsearch-5.5.3.msi /qn INSTALLDIR="C:\Custom Install Directory" PLUGINS="x-pack"

Consult the Windows Installer SDK Command-Line Options for additional rules related to values containing quotation marks.

Running Elasticsearch from the command line

edit

Once installed, Elasticsearch can be started from the command line, if not installed as a service and configured to start when installation completes, as follows:

.\bin\elasticsearch.exe

The command line terminal will display output similar to the following:

elasticsearch exe

By default, Elasticsearch runs in the foreground, prints its logs to STDOUT in addition to the <cluster name>.log file within LOGSDIRECTORY, and can be stopped by pressing Ctrl-C.

Configuring Elasticsearch on the command line

edit

Elasticsearch loads its configuration from the %ES_HOME%\config\elasticsearch.yml file by default. The format of this config file is explained in Configuring Elasticsearch.

Any settings that can be specified in the config file can also be specified on the command line, using the -E syntax as follows:

.\bin\elasticsearch.exe -E cluster.name=my_cluster -E node.name=node_1

Values that contain spaces must be surrounded with quotes. For instance -E path.logs="C:\My Logs\logs".

Typically, any cluster-wide settings (like cluster.name) should be added to the elasticsearch.yml config file, while any node-specific settings such as node.name could be specified on the command line.

Checking that Elasticsearch is running

edit

You can test that your Elasticsearch node is running by sending an HTTP request to port 9200 on localhost:

GET /

which should give you a response something like this:

{
  "name" : "Cp8oag6",
  "cluster_name" : "elasticsearch",
  "cluster_uuid" : "AT69_T_DTp-1qgIJlatQqA",
  "version" : {
    "number" : "5.5.3",
    "build_hash" : "f27399d",
    "build_date" : "2016-03-30T09:51:41.449Z",
    "build_snapshot" : false,
    "lucene_version" : "6.5.1"
  },
  "tagline" : "You Know, for Search"
}

Installing Elasticsearch as a Service on Windows

edit

Elasticsearch can be installed as a service to run in the background or start automatically at boot time without any user interaction. This can be achieved upon installation using the following command line options

  • INSTALLASSERVICE=true
  • STARTAFTERINSTALL=true
  • STARTWHENWINDOWSSTARTS=true

Once installed, Elasticsearch will appear within the Services control panel:

msi installer installed service

and can be stopped and restarted from within the control panel, or from the command line using:

with Command Prompt:

sc.exe stop Elasticsearch
sc.exe start Elasticsearch

with PowerShell:

Get-Service Elasticsearch | Stop-Service | Start-Service

Changes can be made to jvm.options and elasticsearch.yml configuration files to configure the service after installation. Most changes (like JVM settings) will require a restart of the service in order to take affect.

Upgrade using the graphical user interface (GUI)

edit

The .msi package supports upgrading an installed version of Elasticsearch to a newer version of Elasticsearch. The upgrade process through the GUI handles upgrading all installed plugins as well as retaining both your data and configuration.

Downloading and clicking on a newer version of the .msi package will launch the GUI wizard. The first step will list the read only properties from the previous installation:

msi installer upgrade notice

The following configuration step allows certain configuration options to be changed:

msi installer upgrade configuration

Finally, the plugins step allows currently installed plugins to be upgraded or removed, and for plugins not currently installed, to be downloaded and installed:

msi installer upgrade plugins

Upgrade using the command line

edit

The .msi can also upgrade Elasticsearch using the command line.

A command line upgrade requires passing the same command line properties as used at first install time; the Windows Installer does not remember these properties.

For example, if you originally installed with the command line options PLUGINS="x-pack" and LOCKMEMORY="true", then you must pass these same values when performing an upgrade from the command line.

The simplest upgrade, assuming Elasticsearch was installed using all defaults, is achieved by first navigating to the download directory, then running:

start /wait msiexec.exe /i elasticsearch-5.5.3.msi /qn

Similar to the install process, a path to a log file for the upgrade process can be passed using the /l command line argument

start /wait msiexec.exe /i elasticsearch-5.5.3.msi /qn /l upgrade.log

Uninstall using Add/Remove Programs

edit

The .msi package handles uninstallation of all directories and files added as part of installation.

Uninstallation will remove all directories and their contents created as part of installation, including data within the data directory. If you wish to retain your data upon uninstallation, it is recommended that you make a copy of the data directory before uninstallation.

MSI installer packages do not provide a GUI for uninstallation. An installed program can be uninstalled by pressing the Windows key and typing add or remove programs to open the system settings.

Once opened, find the Elasticsearch installation within the list of installed applications, click and choose Uninstall:

msi installer uninstall

This will launch the uninstallation process.

Uninstall using the command line

edit

Uninstallation can also be performed from the command line by navigating to the directory containing the .msi package and running:

start /wait msiexec.exe /x elasticsearch-5.5.3.msi /qn

Similar to the install process, a path to a log file for the uninstallation process can be passed using the /l command line argument

start /wait msiexec.exe /x elasticsearch-5.5.3.msi /qn /l uninstall.log

Next steps

edit

You now have a test Elasticsearch environment set up. Before you start serious development or go into production with Elasticsearch, you will need to do some additional setup: