Java Client and Securityedit

X-Pack security supports the Java transport client for Elasticsearch. The transport client uses the same transport protocol that the cluster nodes use for inter-node communication. It is very efficient as it does not have to marshall and unmarshall JSON requests like a typical REST client.

Using the Java Node Client with secured clusters is not recommended or supported.

Configuring the Transport Client to work with a Secured Clusteredit

To use the transport client with a secured cluster, you need to:

  1. Configure a user with the privileges required to start the transport client. A default transport_client role is built-in to X-Pack that grants the appropriate cluster permissions for the transport client to work with the secured cluster. The transport client uses the Nodes Info API to fetch information about the nodes in the cluster.
  2. Add the X-Pack transport JAR file to your CLASSPATH. You can download the X-Pack distribution and extract the JAR file manually or you can get it from the Elasticsearch Maven repository.

    As with any dependency, you will also need its transitive dependencies. Refer to the X-Pack POM file for your version when downloading for offline usage.

If you are using Maven, you need to add the X-Pack JAR file as a dependency in your project’s pom.xml file:

<project ...>

   <repositories>
      <!-- add the elasticsearch repo -->
      <repository>
         <id>elasticsearch-releases</id>
         <url>https://artifacts.elastic.co/maven</url>
         <releases>
            <enabled>true</enabled>
         </releases>
         <snapshots>
            <enabled>false</enabled>
         </snapshots>
      </repository>
      ...
   </repositories>
   ...

   <dependencies>
      <!-- add the x-pack jar as a dependency -->
      <dependency>
         <groupId>org.elasticsearch.client</groupId>
         <artifactId>x-pack-transport</artifactId>
         <version>{version}</version>
      </dependency>
      ...
   </dependencies>
   ...

 </project>

If you are using Gradle, you need to add the X-Pack JAR file as a dependency in your build.gradle file:

repositories {
  /* ... Any other repositories ... */

  // Add the Elasticsearch Maven Repository
  maven {
    url "https://artifacts.elastic.co/maven"
  }
}

dependencies {
  compile "org.elasticsearch.client:x-pack-transport:{version}"

  /* ... */
}
  1. Set up the transport client. At a minimum, you must configure xpack.security.user to include the name and password of your transport client user in your requests. The following snippet configures the user credentials globally—​every request submitted with this client includes the transport_client_user credentials in its headers.

    import org.elasticsearch.xpack.client.PreBuiltXPackTransportClient;
    ...
    
    TransportClient client = new PreBuiltXPackTransportClient(Settings.builder()
            .put("cluster.name", "myClusterName")
            .put("xpack.security.user", "transport_client_user:changeme")
            ...
            .build())
        .addTransportAddress(new InetSocketTransportAddress("localhost", 9300))
        .addTransportAddress(new InetSocketTransportAddress("localhost", 9301));

    If you configure a transport client without SSL, passwords are sent in clear text.

    You can also add an Authorization header to each request. If you’ve configured global authorization credentials, the Authorization header overrides the global authentication credentials. This is useful when an application has multiple users who access Elasticsearch using the same client. You can set the global token to a user that only has the transport_client role, and add the transport_client role to the individual users.

    For example, the following snippet adds the Authorization header to a search request:

    import org.elasticsearch.common.settings.Settings;
    import org.elasticsearch.common.transport.InetSocketTransportAddress;
    import org.elasticsearch.xpack.security.authc.support.SecuredString;
    import org.elasticsearch.xpack.client.PreBuiltXPackTransportClient;
    
    import static org.elasticsearch.xpack.security.authc.support.UsernamePasswordToken.basicAuthHeaderValue;
    ...
    
    TransportClient client = new PreBuiltXPackTransportClient(Settings.builder()
            .put("cluster.name", "myClusterName")
            .put("xpack.security.user", "transport_client_user:changeme")
            ...
            .build())
        .build()
        .addTransportAddress(new InetSocketTransportAddress(InetAddress.getByName("localhost"), 9300))
        .addTransportAddress(new InetSocketTransportAddress(InetAddress.getByName("localhost"), 9301))
    
    String token = basicAuthHeaderValue("test_user", new SecuredString("changeme".toCharArray()));
    
    client.filterWithHeader(Collections.singletonMap("Authorization", token))
        .prepareSearch().get();
  2. Enable SSL to authenticate clients and encrypt communications. To enable SSL, you need to:

    1. Configure the paths to the client’s key and certificate in addition to the certificate authorities. Client authentication requires every client to have a certification signed by a trusted CA.

      Client authentication is enabled by default. For information about disabling client authentication, see Disabling Client Authentication.

      import org.elasticsearch.xpack.client.PreBuiltXPackTransportClient;
      ...
      
      TransportClient client = new PreBuiltXPackTransportClient(Settings.builder()
              .put("cluster.name", "myClusterName")
              .put("xpack.security.user", "transport_client_user:changeme")
              .put("xpack.ssl.key", "/path/to/client.key")
              .put("xpack.ssl.certificate", "/path/to/client.crt")
              .put("xpack.ssl.certificate_authorities", "/path/to/ca.crt")
              ...
              .build());
    2. Enable the SSL transport by setting xpack.security.transport.ssl.enabled to true in the client configuration.

      import org.elasticsearch.xpack.client.PreBuiltXPackTransportClient;
      ...
      
      TransportClient client = new PreBuiltXPackTransportClient(Settings.builder()
              .put("cluster.name", "myClusterName")
              .put("xpack.security.user", "transport_client_user:changeme")
              .put("xpack.ssl.key", "/path/to/client.key")
              .put("xpack.ssl.certificate", "/path/to/client.crt")
              .put("xpack.ssl.certificate_authorities", "/path/to/ca.crt")
              .put("xpack.security.transport.ssl.enabled", "true")
              ...
              .build())
          .addTransportAddress(new InetSocketTransportAddress(InetAddress.getByName("localhost"), 9300))
          .addTransportAddress(new InetSocketTransportAddress(InetAddress.getByName("localhost"), 9301))
Disabling Client Authenticationedit

If you want to disable client authentication, you can use a client-specific transport protocol. For more information see Separating Node to Node and Client Traffic.

If you are not using client authentication and sign the Elasticsearch node certificates with your own CA, you need to provide the path to the CA certificate in your client configuration.

import org.elasticsearch.xpack.client.PreBuiltXPackTransportClient;
...

TransportClient client = new PreBuiltXPackTransportClient(Settings.builder()
        .put("cluster.name", "myClusterName")
        .put("xpack.security.user", "test_user:changeme")
        .put("xpack.ssl.certificate_authorities", "/path/to/ca.crt")
        .put("xpack.security.transport.ssl.enabled", "true")
        ...
        .build())
    .addTransportAddress(new InetSocketTransportAddress("localhost", 9300))
    .addTransportAddress(new InetSocketTransportAddress("localhost", 9301));

If you are using a public CA that is already trusted by the Java runtime, you to not need to set the xpack.ssl.certificate_authorities.

Connecting Anonymouslyedit

To enable the transport client to connect anonymously, you must assign the anonymous user the privileges defined in the transport_client role. Anonymous access must also be enabled, of course. For more information, see Enabling Anonymous Access.

Security Clientedit

X-Pack security exposes its own API through the SecurityClient class. To get a hold of a SecurityClient you’ll first need to create the XPackClient, which is a wrapper around the existing Elasticsearch clients (any client class implementing org.elasticsearch.client.Client).

The following example shows how you can clear X-Pack security’s realm caches using the SecurityClient:

Client client = ... // create the transport client

XPackClient xpackClient = new XPackClient(client);
SecurityClient securityClient = xpackClient.security();
ClearRealmCacheResponse response = securityClient.authc().prepareClearRealmCache()
    .realms("ldap1", "ad1") 
    .usernames("rdeniro")
    .get();

Clears the ldap1 and ad1 realm caches for the rdeniro user.