Kafka output pluginedit

For other versions, see the Versioned plugin docs.

Getting Helpedit

For questions about the plugin, open a topic in the Discuss forums. For bugs or feature requests, open an issue in Github. For the list of Elastic supported plugins, please consult the Elastic Support Matrix.

Descriptionedit

Write events to a Kafka topic.

This plugin uses Kafka Client 2.5. For broker compatibility, see the official Kafka compatibility reference. If the linked compatibility wiki is not up-to-date, please contact Kafka support/community to confirm compatibility.

If you require features not yet available in this plugin (including client version upgrades), please file an issue with details about what you need.

This output supports connecting to Kafka over:

  • SSL (requires plugin version 3.0.0 or later)
  • Kerberos SASL (requires plugin version 5.1.0 or later)

By default security is disabled but can be turned on as needed.

The only required configuration is the topic_id.

The default codec is plain. Logstash will encode your events with not only the message field but also with a timestamp and hostname.

If you want the full content of your events to be sent as json, you should set the codec in the output configuration like this:

    output {
      kafka {
        codec => json
        topic_id => "mytopic"
      }
    }

For more information see https://kafka.apache.org/25/documentation.html#theproducer

Kafka producer configuration: https://kafka.apache.org/25/documentation.html#producerconfigs

This plugin does not support using a proxy when communicating to the Kafka broker.

Kafka Output Configuration Optionsedit

This plugin supports the following configuration options plus the Common Options described later.

Some of these options map to a Kafka option. Defaults usually reflect the Kafka default setting, and might change if Kafka’s producer defaults change. See the https://kafka.apache.org/25/documentation for more details.

Also see Common Options for a list of options supported by all output plugins.

 

acksedit

  • Value can be any of: 0, 1, all
  • Default value is "1"

The number of acknowledgments the producer requires the leader to have received before considering a request complete.

acks=0. The producer will not wait for any acknowledgment from the server.

acks=1. The leader will write the record to its local log, but will respond without waiting for full acknowledgement from all followers.

acks=all. The leader will wait for the full set of in-sync replicas before acknowledging the record.

batch_sizeedit

  • Value type is number
  • Default value is 16384.

The producer will attempt to batch records together into fewer requests whenever multiple records are being sent to the same partition. This helps performance on both the client and the server. This configuration controls the default batch size in bytes.

bootstrap_serversedit

  • Value type is string
  • Default value is "localhost:9092"

This is for bootstrapping and the producer will only use it for getting metadata (topics, partitions and replicas). The socket connections for sending the actual data will be established based on the broker information returned in the metadata. The format is host1:port1,host2:port2, and the list can be a subset of brokers or a VIP pointing to a subset of brokers.

buffer_memoryedit

  • Value type is number
  • Default value is 33554432 (32MB).

The total bytes of memory the producer can use to buffer records waiting to be sent to the server.

client_dns_lookupedit

  • Value type is string
  • Valid options are use_all_dns_ips, resolve_canonical_bootstrap_servers_only, default
  • Default value is "default"

Controls how DNS lookups are done. If set to use_all_dns_ips, Logstash tries all IP addresses returned for a hostname before failing the connection. If set to resolve_canonical_bootstrap_servers_only, each entry will be resolved and expanded into a list of canonical names.

client_idedit

  • Value type is string
  • There is no default value for this setting.

The id string to pass to the server when making requests. The purpose of this is to be able to track the source of requests beyond just ip/port by allowing a logical application name to be included with the request

compression_typeedit

  • Value can be any of: none, gzip, snappy, lz4, zstd
  • Default value is "none"

The compression type for all data generated by the producer. The default is none (meaning no compression). Valid values are none, gzip, snappy, lz4, or zstd.

jaas_pathedit

  • Value type is path
  • There is no default value for this setting.

The Java Authentication and Authorization Service (JAAS) API supplies user authentication and authorization services for Kafka. This setting provides the path to the JAAS file. Sample JAAS file for Kafka client:

KafkaClient {
  com.sun.security.auth.module.Krb5LoginModule required
  useTicketCache=true
  renewTicket=true
  serviceName="kafka";
  };

Please note that specifying jaas_path and kerberos_config in the config file will add these to the global JVM system properties. This means if you have multiple Kafka inputs, all of them would be sharing the same jaas_path and kerberos_config. If this is not desirable, you would have to run separate instances of Logstash on different JVM instances.

kerberos_configedit

  • Value type is path
  • There is no default value for this setting.

Optional path to kerberos config file. This is krb5.conf style as detailed in https://web.mit.edu/kerberos/krb5-1.12/doc/admin/conf_files/krb5_conf.html

key_serializeredit

  • Value type is string
  • Default value is "org.apache.kafka.common.serialization.StringSerializer"

Serializer class for the key of the message

linger_msedit

  • Value type is number
  • Default value is 0

The producer groups together any records that arrive in between request transmissions into a single batched request. Normally this occurs only under load when records arrive faster than they can be sent out. However in some circumstances the client may want to reduce the number of requests even under moderate load. This setting accomplishes this by adding a small amount of artificial delay—that is, rather than immediately sending out a record the producer will wait for up to the given delay to allow other records to be sent so that the sends can be batched together.

max_request_sizeedit

  • Value type is number
  • Default value is 1048576 (1MB).

The maximum size of a request

message_keyedit

  • Value type is string
  • There is no default value for this setting.

The key for the message.

metadata_fetch_timeout_msedit

  • Value type is number
  • Default value is 60000 milliseconds (60 seconds).

The timeout setting for initial metadata request to fetch topic metadata.

metadata_max_age_msedit

  • Value type is number
  • Default value is 300000 milliseconds (5 minutes).

The max time in milliseconds before a metadata refresh is forced.

partitioneredit

  • Value type is string
  • There is no default value for this setting.

The default behavior is to hash the message_key of an event to get the partition. When no message key is present, the plugin picks a partition in a round-robin fashion.

Available options for choosing a partitioning strategy are as follows:

  • default use the default partitioner as described above
  • round_robin distributes writes to all partitions equally, regardless of message_key
  • uniform_sticky sticks to a partition for the duration of a batch than randomly picks a new one

receive_buffer_bytesedit

  • Value type is number
  • Default value is 32768 (32KB).

The size of the TCP receive buffer to use when reading data

reconnect_backoff_msedit

  • Value type is number
  • Default value is 50.

The amount of time to wait before attempting to reconnect to a given host when a connection fails.

request_timeout_msedit

  • Value type is number
  • Default value is 40000 milliseconds (40 seconds).

The configuration controls the maximum amount of time the client will wait for the response of a request. If the response is not received before the timeout elapses the client will resend the request if necessary or fail the request if retries are exhausted.

retriesedit

  • Value type is number
  • There is no default value for this setting.

The default retry behavior is to retry until successful. To prevent data loss, the use of this setting is discouraged.

If you choose to set retries, a value greater than zero will cause the client to only retry a fixed number of times. This will result in data loss if a transport fault exists for longer than your retry count (network outage, Kafka down, etc).

A value less than zero is a configuration error.

Starting with version 10.5.0, this plugin will only retry exceptions that are a subclass of RetriableException and InterruptException. If producing a message throws any other exception, an error is logged and the message is dropped without retrying. This prevents the Logstash pipeline from hanging indefinitely.

In versions prior to 10.5.0, any exception is retried indefinitely unless the retries option is configured.

retry_backoff_msedit

  • Value type is number
  • Default value is 100 milliseconds.

The amount of time to wait before attempting to retry a failed produce request to a given topic partition.

sasl_jaas_configedit

  • Value type is string
  • There is no default value for this setting.

JAAS configuration setting local to this plugin instance, as opposed to settings using config file configured using jaas_path, which are shared across the JVM. This allows each plugin instance to have its own configuration.

If both sasl_jaas_config and jaas_path configurations are set, the setting here takes precedence.

Example (setting for Azure Event Hub):

    output {
      kafka {
        sasl_jaas_config => "org.apache.kafka.common.security.plain.PlainLoginModule required username='auser'  password='apassword';"
      }
    }

sasl_kerberos_service_nameedit

  • Value type is string
  • There is no default value for this setting.

The Kerberos principal name that Kafka broker runs as. This can be defined either in Kafka’s JAAS config or in Kafka’s config.

sasl_mechanismedit

  • Value type is string
  • Default value is "GSSAPI"

SASL mechanism used for client connections. This may be any mechanism for which a security provider is available. GSSAPI is the default mechanism.

security_protocoledit

  • Value can be any of: PLAINTEXT, SSL, SASL_PLAINTEXT, SASL_SSL
  • Default value is "PLAINTEXT"

Security protocol to use, which can be either of PLAINTEXT,SSL,SASL_PLAINTEXT,SASL_SSL

send_buffer_bytesedit

  • Value type is number
  • Default value is 131072 (128KB).

The size of the TCP send buffer to use when sending data.

ssl_endpoint_identification_algorithmedit

  • Value type is string
  • Default value is "https"

The endpoint identification algorithm, defaults to "https". Set to empty string "" to disable

ssl_key_passwordedit

  • Value type is password
  • There is no default value for this setting.

The password of the private key in the key store file.

ssl_keystore_locationedit

  • Value type is path
  • There is no default value for this setting.

If client authentication is required, this setting stores the keystore path.

ssl_keystore_passwordedit

  • Value type is password
  • There is no default value for this setting.

If client authentication is required, this setting stores the keystore password

ssl_keystore_typeedit

  • Value type is string
  • There is no default value for this setting.

The keystore type.

ssl_truststore_locationedit

  • Value type is path
  • There is no default value for this setting.

The JKS truststore path to validate the Kafka broker’s certificate.

ssl_truststore_passwordedit

  • Value type is password
  • There is no default value for this setting.

The truststore password

ssl_truststore_typeedit

  • Value type is string
  • There is no default value for this setting.

The truststore type.

topic_idedit

  • This is a required setting.
  • Value type is string
  • There is no default value for this setting.

The topic to produce messages to

value_serializeredit

  • Value type is string
  • Default value is "org.apache.kafka.common.serialization.StringSerializer"

Serializer class for the value of the message

Common Optionsedit

The following configuration options are supported by all output plugins:

Setting Input type Required

codec

codec

No

enable_metric

boolean

No

id

string

No

codecedit

  • Value type is codec
  • Default value is "plain"

The codec used for output data. Output codecs are a convenient method for encoding your data before it leaves the output without needing a separate filter in your Logstash pipeline.

enable_metricedit

  • Value type is boolean
  • Default value is true

Disable or enable metric logging for this specific plugin instance. By default we record all the metrics we can, but you can disable metrics collection for a specific plugin.

idedit

  • Value type is string
  • There is no default value for this setting.

Add a unique ID to the plugin configuration. If no ID is specified, Logstash will generate one. It is strongly recommended to set this ID in your configuration. This is particularly useful when you have two or more plugins of the same type. For example, if you have 2 kafka outputs. Adding a named ID in this case will help in monitoring Logstash when using the monitoring APIs.

output {
  kafka {
    id => "my_plugin_id"
  }
}

Variable substitution in the id field only supports environment variables and does not support the use of values from the secret store.