This section deals with Logstash, including an explanation of its internal parts at a high level. X-Pack monitoring for Logstash represents a total of two pieces:
These pieces are created when X-Pack monitoring for Logstash is enabled, and they
live outside of the default Logstash pipeline in a dedicated monitoring
pipeline. This configuration means that all data and processing has a minimal
impact on ordinary Logstash processing. As a secondary benefit of existing in a
separate pipeline, existing Logstash features, such as the
elasticsearch output, can be reused to
benefit from its retry policies.
elasticsearch output that is used by X-Pack monitoring for Logstash is
configured exclusively via settings found in
logstash.yml. It is not
configured by using anything from the Logstash configurations that might also be
using their own separate
The Elasticsearch cluster that is configured for use with X-Pack monitoring for Logstash is expected to be the production cluster. This configuration enables the production Elasticsearch cluster to add metadata (for example, its cluster UUID) to the Logstash monitoring data then route it to the monitoring clusters. For more information about typical monitoring architectures, see How monitoring works.
Collectors, as their name implies, collect things. In X-Pack monitoring for Logstash, collectors are just Inputs in the same way that ordinary Logstash configurations provide inputs.
Like X-Pack monitoring for Elasticsearch, each collector can create zero or more monitoring documents. As it is currently implemented, each Logstash node runs two types of collectors: one for node stats and one for pipeline stats.
Gathers details about the running node, such as memory utilization and CPU
usage (for example,
This runs on every Logstash node with X-Pack monitoring enabled. One common
failure is that Logstash directories are copied with their
Gathers details about the node’s running pipelines, which powers the Monitoring Pipeline UI.
Per collection interval, which defaults to 10 seconds (
10s), each collector is
run. The failure of an individual collector does not impact any other collector.
Each collector, as an ordinary Logstash input, creates a separate Logstash event
in its isolated monitoring pipeline. The Logstash output then sends the data.
The collection interval can be configured dynamically and you can also disable data collection. For more information about the configuration options for the collectors, see Monitoring Settings.
Unlike X-Pack monitoring for Elasticsearch and Kibana, there is no
xpack.monitoring.collection.enabled setting on Logstash. You must use the
xpack.monitoring.enabled setting to enable and disable data collection.
If gaps exist in the monitoring charts in Kibana, it is typically because either a collector failed or the monitoring cluster did not receive the data (for example, it was being restarted). In the event that a collector fails, a logged error should exist on the node that attempted to perform the collection.
Like all Logstash pipelines, the purpose of the dedicated monitoring pipeline is
to send events to outputs. In the case of X-Pack monitoring for Logstash, the output
is always an
elasticsearch output. However, unlike ordinary Logstash pipelines,
the output is configured within the
logstash.yml settings file via the
Other than its unique manner of configuration, this
behaves like all
elasticsearch outputs, including its ability to pause data
collection when issues exist with the output.
It is critical that all Logstash nodes share the same setup. Otherwise, monitoring data might be routed in different ways or to different places.
If a Logstash node does not explicitly define an X-Pack monitoring output setting, the following default configuration is used:
xpack.monitoring.elasticsearch.url: [ "http://localhost:9200" ]
All data produced by X-Pack monitoring for Logstash is indexed in the monitoring
cluster by using the
.monitoring-logstash template, which is managed by the
exporters within Elasticsearch.
If you are working with a cluster that has X-Pack security enabled, extra steps are necessary to properly configure Logstash. For more information, see X-Pack monitoring.
When discussing security relative to the
elasticsearch output, it
is critical to remember that all users are managed on the production cluster,
which is identified in the
This is particularly important to remember when you move from development
environments to production environments, where you often have dedicated
For more information about the configuration options for the output, see Monitoring Settings.