Metricbeat command reference
editMetricbeat command reference
editMetricbeat provides a command-line interface for starting Metricbeat and performing common tasks, like testing configuration files and loading dashboards.
The command-line also supports global flags for controlling global behaviors.
Use sudo
to run the following commands if:
-
the config file is owned by
root
, or -
Metricbeat is configured to capture data that requires
root
access
Some of the features described here require an Elastic license. For more information, see https://www.elastic.co/subscriptions and License Management.
Commands | |
---|---|
Exports the configuration, index template, ILM policy, or a dashboard to stdout. |
|
Shows help for any command. |
|
Manages the secrets keystore. |
|
Manages configured modules. |
|
Runs Metricbeat. This command is used by default if you start Metricbeat without specifying a command. |
|
Sets up the initial environment, including the index template, ILM policy and write alias, and Kibana dashboards (when available). |
|
Tests the configuration. |
|
Shows information about the current version. |
Also see Global flags.
export
command
editExports the configuration, index template, ILM policy, or a dashboard to stdout. You can use this command to quickly view your configuration, see the contents of the index template and the ILM policy, or export a dashboard from Kibana.
SYNOPSIS
metricbeat export SUBCOMMAND [FLAGS]
SUBCOMMANDS
-
config
-
Exports the current configuration to stdout. If you use the
-c
flag, this command exports the configuration that’s defined in the specified file. -
dashboard
-
Exports a dashboard. You can use this option to store a dashboard on disk in a module and load it automatically. For example, to export the dashboard to a JSON file, run:
metricbeat export dashboard --id="DASHBOARD_ID" > dashboard.json
To find the
DASHBOARD_ID
, look at the URL for the dashboard in Kibana. By default,export dashboard
writes the dashboard to stdout. The example shows how to write the dashboard to a JSON file so that you can import it later. The JSON file will contain the dashboard with all visualizations and searches. You must load the index pattern separately for Metricbeat.To load the dashboard, copy the generated
dashboard.json
file into thekibana/6/dashboard
directory of Metricbeat, and runmetricbeat setup --dashboards
to import the dashboard.If Kibana is not running on
localhost:5061
, you must also adjust the Metricbeat configuration undersetup.kibana
. -
template
-
Exports the index template to stdout. You can specify the
--es.version
and--index
flags to further define what gets exported. Furthermore you can export the template to a file instead ofstdout
by defining a directory via--dir
.
-
ilm-policy
-
Exports the index lifecycle management policy to stdout. You can specify the
--es.version
and a--dir
to which the policy should be exported as a file rather than exporting tostdout
.
FLAGS
-
--es.version VERSION
-
When used with
template
, exports an index template that is compatible with the specified version. When used withilm-policy
, exports the ILM policy if the specified ES version is enabled for ILM. -
-h, --help
-
Shows help for the
export
command. -
--index BASE_NAME
-
When used with
template
, sets the base name to use for the index template. If this flag is not specified, the default base name ismetricbeat
. -
--dir DIRNAME
-
Define a directory to which the template and ILM policy should be exported to
as files instead of printing them to
stdout
. -
--id DASHBOARD_ID
-
When used with
dashboard
, specifies the dashboard ID.
Also see Global flags.
EXAMPLES
metricbeat export config metricbeat export template --es.version 7.17.24 --index myindexname metricbeat export dashboard --id="a7b35890-8baa-11e8-9676-ef67484126fb" > dashboard.json
help
command
editShows help for any command.
If no command is specified, shows help for the run
command.
SYNOPSIS
metricbeat help COMMAND_NAME [FLAGS]
-
COMMAND_NAME
- Specifies the name of the command to show help for.
FLAGS
-
-h, --help
-
Shows help for the
help
command.
Also see Global flags.
EXAMPLE
metricbeat help export
keystore
command
editManages the secrets keystore.
SYNOPSIS
metricbeat keystore SUBCOMMAND [FLAGS]
SUBCOMMANDS
-
add KEY
-
Adds the specified key to the keystore. Use the
--force
flag to overwrite an existing key. Use the--stdin
flag to pass the value throughstdin
. -
create
-
Creates a keystore to hold secrets. Use the
--force
flag to overwrite the existing keystore. -
list
- Lists the keys in the keystore.
-
remove KEY
- Removes the specified key from the keystore.
FLAGS
-
--force
-
Valid with the
add
andcreate
subcommands. When used withadd
, overwrites the specified key. When used withcreate
, overwrites the keystore. -
--stdin
-
When used with
add
, uses the stdin as the source of the key’s value. -
-h, --help
-
Shows help for the
keystore
command.
Also see Global flags.
EXAMPLES
metricbeat keystore create metricbeat keystore add ES_PWD metricbeat keystore remove ES_PWD metricbeat keystore list
See Secrets keystore for more examples.
modules
command
editManages configured modules. You can use this command to enable and disable
specific module configurations defined in the modules.d
directory. The
changes you make with this command are persisted and used for subsequent
runs of Metricbeat.
To see which modules are enabled and disabled, run the list
subcommand.
SYNOPSIS
metricbeat modules SUBCOMMAND [FLAGS]
SUBCOMMANDS
-
disable MODULE_LIST
- Disables the modules specified in the space-separated list.
-
enable MODULE_LIST
- Enables the modules specified in the space-separated list.
-
list
- Lists the modules that are currently enabled and disabled.
FLAGS
-
-h, --help
-
Shows help for the
export
command.
Also see Global flags.
EXAMPLES
metricbeat modules list metricbeat modules enable apache nginx system
run
command
editRuns Metricbeat. This command is used by default if you start Metricbeat without specifying a command.
SYNOPSIS
metricbeat run [FLAGS]
Or:
metricbeat [FLAGS]
FLAGS
-
-N, --N
- Disables publishing for testing purposes. This option disables all outputs except the File output.
-
--cpuprofile FILE
- Writes CPU profile data to the specified file. This option is useful for troubleshooting Metricbeat.
-
-h, --help
-
Shows help for the
run
command. -
--httpprof [HOST]:PORT
- Starts an http server for profiling. This option is useful for troubleshooting and profiling Metricbeat.
-
--memprofile FILE
- Writes memory profile data to the specified output file. This option is useful for troubleshooting Metricbeat.
-
--system.hostfs MOUNT_POINT
- Specifies the mount point of the host’s filesystem for use in monitoring a host.
Also see Global flags.
EXAMPLE
metricbeat run -e
Or:
metricbeat -e
setup
command
editSets up the initial environment, including the index template, ILM policy and write alias, and Kibana dashboards (when available)
- The index template ensures that fields are mapped correctly in Elasticsearch. If index lifecycle management is enabled it also ensures that the defined ILM policy and write alias are connected to the indices matching the index template. The ILM policy takes care of the lifecycle of an index, when to do a rollover, when to move an index from the hot phase to the next phase, etc.
- The Kibana dashboards make it easier for you to visualize Metricbeat data in Kibana.
This command sets up the environment without actually running Metricbeat and ingesting data. Specify optional flags to set up a subset of assets.
SYNOPSIS
metricbeat setup [FLAGS]
FLAGS
-
--dashboards
- Sets up the Kibana dashboards (when available). This option loads the dashboards from the Metricbeat package. For more options, such as loading customized dashboards, see Importing Existing Beat Dashboards in the Beats Developer Guide.
-
-h, --help
-
Shows help for the
setup
command. -
--index-management
- Sets up components related to Elasticsearch index management including template, ILM policy, and write alias (if supported and configured).
-
--template
-
[7.2]
Deprecated in 7.2.
Sets up the index template only.
It is recommended to use
--index-management
instead. -
--ilm-policy
-
[7.2]
Deprecated in 7.2.
Sets up the index lifecycle management policy.
It is recommended to use
--index-management
instead.
Also see Global flags.
EXAMPLES
metricbeat setup --dashboards metricbeat setup --machine-learning metricbeat setup --index-management
test
command
editTests the configuration.
SYNOPSIS
metricbeat test SUBCOMMAND [FLAGS]
SUBCOMMANDS
-
config
- Tests the configuration settings.
-
modules [MODULE_NAME] [METRICSET_NAME]
-
Tests module settings for all configured modules. When you run this command,
Metricbeat does a test run that applies the current settings, retrieves the
metrics, and shows them as output. To test the settings for a specific module,
specify
MODULE_NAME
. To test the settings for a specific metricset in the module, also specifyMETRICSET_NAME
. -
output
- Tests that Metricbeat can connect to the output by using the current settings.
FLAGS
-
-h, --help
-
Shows help for the
test
command.
Also see Global flags.
EXAMPLES
metricbeat test config metricbeat test modules system cpu
version
command
editShows information about the current version.
SYNOPSIS
metricbeat version [FLAGS]
FLAGS
-
-h, --help
-
Shows help for the
version
command.
Also see Global flags.
EXAMPLE
metricbeat version
Global flags
editThese global flags are available whenever you run Metricbeat.
-
-E, --E "SETTING_NAME=VALUE"
-
Overrides a specific configuration setting. You can specify multiple overrides. For example:
metricbeat -E "name=mybeat" -E "output.elasticsearch.hosts=['http://myhost:9200']"
This setting is applied to the currently running Metricbeat process. The Metricbeat configuration file is not changed.
-
-c, --c FILE
-
Specifies the configuration file to use for Metricbeat. The file you specify
here is relative to
path.config
. If the-c
flag is not specified, the default config file,metricbeat.yml
, is used. -
-d, --d SELECTORS
-
Enables debugging for the specified selectors. For the selectors, you can
specify a comma-separated
list of components, or you can use
-d "*"
to enable debugging for all components. For example,-d "publisher"
displays all the publisher-related messages. -
-e, --e
- Logs to stderr and disables syslog/file output.
-
-environment
-
For logging purposes, specifies the environment that Metricbeat is running in.
This setting is used to select a default log output when no log output is configured.
Supported values are:
systemd
,container
,macos_service
, andwindows_service
. Ifsystemd
orcontainer
is specified, Metricbeat will log to stdout and stderr by default. -
--path.config
- Sets the path for configuration files. See the Directory layout section for details.
-
--path.data
- Sets the path for data files. See the Directory layout section for details.
-
--path.home
- Sets the path for miscellaneous files. See the Directory layout section for details.
-
--path.logs
- Sets the path for log files. See the Directory layout section for details.
-
--strict.perms
-
Sets strict permission checking on configuration files. The default is
-strict.perms=true
. See Config file ownership and permissions for more information. -
-v, --v
- Logs INFO-level messages.