metricsedit

The metrics filter is useful for aggregating metrics.

Elasticsearch 2.0 no longer allows field names with dots. Version 3.0 of the metrics filter plugin changes behavior to use nested fields rather than dotted notation to avoid colliding with versions of Elasticsearch 2.0+. Please note the changes in the documentation (underscores and sub-fields used).

For example, if you have a field response that is a http response code, and you want to count each kind of response, you can do this:

    filter {
      metrics {
        meter => [ "http_%{response}" ]
        add_tag => "metric"
      }
    }

Metrics are flushed every 5 seconds by default or according to flush_interval. Metrics appear as new events in the event stream and go through any filters that occur after as well as outputs.

In general, you will want to add a tag to your metrics and have an output explicitly look for that tag.

The event that is flushed will include every meter and timer metric in the following way:

meter valuesedit

For a meter => "something" you will receive the following fields:

  • "[thing][count]" - the total count of events
  • "[thing][rate_1m]" - the 1-minute rate (sliding)
  • "[thing][rate_5m]" - the 5-minute rate (sliding)
  • "[thing][rate_15m]" - the 15-minute rate (sliding)

timer valuesedit

For a timer => [ "thing", "%{duration}" ] you will receive the following fields:

  • "[thing][count]" - the total count of events
  • "[thing][rate_1m]" - the 1-minute rate of events (sliding)
  • "[thing][rate_5m]" - the 5-minute rate of events (sliding)
  • "[thing][rate_15m]" - the 15-minute rate of events (sliding)
  • "[thing][min]" - the minimum value seen for this metric
  • "[thing][max]" - the maximum value seen for this metric
  • "[thing][stddev]" - the standard deviation for this metric
  • "[thing][mean]" - the mean for this metric
  • "[thing][pXX]" - the XXth percentile for this metric (see percentiles)

Example: computing event rateedit

For a simple example, let’s track how many events per second are running through logstash:

    input {
      generator {
        type => "generated"
      }
    }

    filter {
      if [type] == "generated" {
        metrics {
          meter => "events"
          add_tag => "metric"
        }
      }
    }

    output {
      # only emit events with the 'metric' tag
      if "metric" in [tags] {
        stdout {
          codec => line {
            format => "rate: %{[events][rate_1m]}"
          }
        }
      }
    }

Running the above:

    % bin/logstash -f example.conf
    rate: 23721.983566819246
    rate: 24811.395722536377
    rate: 25875.892745934525
    rate: 26836.42375967113

We see the output includes our events 1-minute rate.

In the real world, you would emit this to graphite or another metrics store, like so:

    output {
      graphite {
        metrics => [ "events.rate_1m", "%{[events][rate_1m]}" ]
      }
    }

 

Synopsisedit

This plugin supports the following configuration options:

Required configuration options:

metrics {
}

Available configuration options:

Setting Input type Required Default value

add_field

hash

No

{}

add_tag

array

No

[]

clear_interval

number

No

-1

flush_interval

number

No

5

ignore_older_than

number

No

0

meter

array

No

[]

percentiles

array

No

[1, 5, 10, 90, 95, 99, 100]

periodic_flush

boolean

No

false

rates

array

No

[1, 5, 15]

remove_field

array

No

[]

remove_tag

array

No

[]

timer

hash

No

{}

Detailsedit

 

add_fieldedit

  • Value type is hash
  • Default value is {}

If this filter is successful, add any arbitrary fields to this event. Field names can be dynamic and include parts of the event using the %{field}.

Example:

    filter {
      metrics {
        add_field => { "foo_%{somefield}" => "Hello world, from %{host}" }
      }
    }
[source,ruby]
    # You can also add multiple fields at once:
    filter {
      metrics {
        add_field => {
          "foo_%{somefield}" => "Hello world, from %{host}"
          "new_field" => "new_static_value"
        }
      }
    }

If the event has field "somefield" == "hello" this filter, on success, would add field foo_hello if it is present, with the value above and the %{host} piece replaced with that value from the event. The second example would also add a hardcoded field.

add_tagedit

  • Value type is array
  • Default value is []

If this filter is successful, add arbitrary tags to the event. Tags can be dynamic and include parts of the event using the %{field} syntax.

Example:

    filter {
      metrics {
        add_tag => [ "foo_%{somefield}" ]
      }
    }
[source,ruby]
    # You can also add multiple tags at once:
    filter {
      metrics {
        add_tag => [ "foo_%{somefield}", "taggedy_tag"]
      }
    }

If the event has field "somefield" == "hello" this filter, on success, would add a tag foo_hello (and the second example would of course add a taggedy_tag tag).

clear_intervaledit

  • Value type is number
  • Default value is -1

The clear interval, when all counter are reset.

If set to -1, the default value, the metrics will never be cleared. Otherwise, should be a multiple of 5s.

flush_intervaledit

  • Value type is number
  • Default value is 5

The flush interval, when the metrics event is created. Must be a multiple of 5s.

ignore_older_thanedit

  • Value type is number
  • Default value is 0

Don’t track events that have @timestamp older than some number of seconds.

This is useful if you want to only include events that are near real-time in your metrics.

Example, to only count events that are within 10 seconds of real-time, you would do this:

filter {
  metrics {
    meter => [ "hits" ]
    ignore_older_than => 10
  }
}

meteredit

  • Value type is array
  • Default value is []

syntax: meter => [ "name of metric", "name of metric" ]

percentilesedit

  • Value type is array
  • Default value is [1, 5, 10, 90, 95, 99, 100]

The percentiles that should be measured

periodic_flushedit

  • Value type is boolean
  • Default value is false

Call the filter flush method at regular interval. Optional.

ratesedit

  • Value type is array
  • Default value is [1, 5, 15]

The rates that should be measured, in minutes. Possible values are 1, 5, and 15.

remove_fieldedit

  • Value type is array
  • Default value is []

If this filter is successful, remove arbitrary fields from this event. Fields names can be dynamic and include parts of the event using the %{field} Example:

    filter {
      metrics {
        remove_field => [ "foo_%{somefield}" ]
      }
    }
[source,ruby]
    # You can also remove multiple fields at once:
    filter {
      metrics {
        remove_field => [ "foo_%{somefield}", "my_extraneous_field" ]
      }
    }

If the event has field "somefield" == "hello" this filter, on success, would remove the field with name foo_hello if it is present. The second example would remove an additional, non-dynamic field.

remove_tagedit

  • Value type is array
  • Default value is []

If this filter is successful, remove arbitrary tags from the event. Tags can be dynamic and include parts of the event using the %{field} syntax.

Example:

    filter {
      metrics {
        remove_tag => [ "foo_%{somefield}" ]
      }
    }
[source,ruby]
    # You can also remove multiple tags at once:
    filter {
      metrics {
        remove_tag => [ "foo_%{somefield}", "sad_unwanted_tag"]
      }
    }

If the event has field "somefield" == "hello" this filter, on success, would remove the tag foo_hello if it is present. The second example would remove a sad, unwanted tag as well.

timeredit

  • Value type is hash
  • Default value is {}

syntax: timer => [ "name of metric", "%{time_value}" ]