Create a service-level objective (SLO)

edit

Create a service-level objective (SLO)

edit

This functionality is in beta and is subject to change. The design and code is less mature than official GA features and is being provided as-is with no warranties. Beta features are not subject to the support SLA of official GA features.

Before creating an SLO, you need to configure your SLO access.

To create an SLO, go to Observability → SLOs:

  • If you’re creating your first SLO, you’ll see an introductory page. Click the Create SLO button.
  • If you’ve created SLOs before, click the Create new SLO button in the upper-right corner of the page.

From here, complete the following steps:

Define your SLI

edit

The type of SLI to use depends on the location of your data:

Custom KQL

edit

Create an indicator based on any of your Elasticsearch indices or data views. You define two queries: one that yields the good events from your index, and one that yields the total events from your index.

Example: You can define a custom KQL indicator based on the service-logs with the good query defined as nested.field.response.latency <= 100 and nested.field.env : “production” and the total query defined as nested.field.env : “production”.

When defining a custom KQL SLI, set the following fields:

  • Index — The data view or index pattern you want to base the SLI on. For example, service-logs.
  • Timestamp field — The timestamp field used by the index.
  • Query filter — A KQL filter to specify relevant criteria by which to filter the index documents.
  • Good query — The query yielding events that are considered good or successful. For example, nested.field.response.latency <= 100 and nested.field.env : “production”
  • Total query — The query yielding all events to take into account for computing the SLI. For example, nested.field.env : “production”.
  • Partition by — The field used to partition the data based on the values of the specific field. For example, you could partition by the url.domain field, which would create individual SLOs for each value of the selected field.

Custom metric

edit

Create an indicator to define custom equations from metric fields in your indices.

Example: You can define Good events as the sum of the field processor.processed with a filter of "processor.outcome: \"success\"", and the Total events as the sum of processor.processed with a filter of "processor.outcome: *".

When defining a custom metric SLI, set the following fields:

  • Source

    • Index — The data view or index pattern you want to base the SLI on. For example, my-service-*.
    • Timestamp field — The timestamp field used by the index.
    • Query filter — A KQL filter to specify relevant criteria by which to filter the index documents. For example, 'field.environment : "production" and service.name : "my-service"'.
  • Good events

    • Metric [A-Z] — The field that is aggregated using the sum aggregation for good events. For example, processor.processed.
    • Filter [A-Z] — The filter to apply to the metric for good events. For example, "processor.outcome: \"success\"".
    • Equation — The equation that calculates the good metric. For example, A.
  • Total events

    • Metric [A-Z] — The field that is aggregated using the sum aggregation for total events. For example, processor.processed
    • Filter [A-Z] — The filter to apply to the metric for total events. For example, "processor.outcome: *"
    • Equation — The equation that calculates the total metric. For example, A.
  • Partition by — The field used to partition the data based on the values of the specific field. For example, you could partition by the url.domain field, which would create individual SLOs for each value of the selected field.

Histogram metric

edit

Histograms record data in a compressed format and can record latency and delay metrics. You can create an SLI based on histogram metrics using a range aggregation or a value_count aggregation for both the good and total events. Filtering with KQL queries is supported on both event types.

When using a range aggregation, both the from and to thresholds are required for the range and the events are the total number of events within that range. The range includes the from value and excludes the to value.

Example: You can define your Good events using the processor.latency field with a filter of "processor.outcome: \"success\"", and your Total events using the processor.latency field with a filter of "processor.outcome: *".

When defining a histogram metric SLI, set the following fields:

  • Source

    • Index — The data view or index pattern you want to base the SLI on. For example, my-service-*.
    • Timestamp field — The timestamp field used by the index.
    • Query filter — A KQL filter to specify relevant criteria by which to filter the index documents. For example, field.environment : "production" and service.name : "my-service".
  • Good events

    • Aggregation — The type of aggregation to use for good events, either Value count or Range.
    • Field — The field used to aggregate events considered good or successful. For example, processor.latency.
    • From — (range aggregation only) The starting value of the range for good events. For example, 0.
    • To — (range aggregation only) The ending value of the range for good events. For example, 100.
    • KQL filter — The filter for good events. For example, "processor.outcome: \"success\"".
  • Total events

    • Aggregation — The type of aggregation to use for total events, either Value count or Range.
    • Field — The field used to aggregate total events. For example, processor.latency.
    • From — (range aggregation only) The starting value of the range for total events. For example, 0.
    • To — (range aggregation only) The ending value of the range for total events. For example, 100.
    • KQL filter — The filter for total events. For example, "processor.outcome : *".
  • Partition by — The field used to partition the data based on the values of the specific field. For example, you could partition by the url.domain field, which would create individual SLOs for each value of the selected field.

APM latency and APM availability

edit
APM latency
edit

Create an indicator based on the APM data that you received from your instrumented services and a latency threshold.

Example: You can define an indicator on an APM service named banking-service for the production environment, and the transaction name POST /deposit with a latency threshold value of 300ms.

APM availability
edit

Create an indicator based on the APM data received from your instrumented services.

Example: You can define an indicator on an APM service named search-service for the production environment, and the transaction name POST /search.

When defining an APM latency or APM availability SLI, set the following fields:

  • Service name — The APM service name.
  • Service environment — Either all or the specific environment.
  • Transaction type — Either all or the specific transaction type.
  • Transaction name — Either all or the specific transaction name.
  • Threshold (APM latency only) — The latency threshold in milliseconds (ms) to consider the request as good.
  • Query filter — An optional query filter on the APM data.

Set your objectives

edit

After defining your SLI, you need to set your objectives. To set your objectives, complete the following:

Select your budgeting method

edit

You can select either an occurrences or a timeslices budgeting method:

Occurrences

Uses the number of good events and the number of total events to compute the SLO.

Example: You have a 30 day rolling SLO with a 95% target, and, over the past 30 days, there were 1,355,700 total events. The error budget is 100-95 = 5%, or about 66,785 bad events are tolerated before violating the SLO.

If you had 1,300,000 good events over the same period, the observed value is Good Events / Total Events = 0.95891421 => 95.89%.

Timeslices

Breaks the overall time window into smaller slices of a defined duration, and uses the number of good slices over the number of total slices to compute the SLO.

Timeslice target (%) - Individual timeslices target that determines if the slice is good or bad. Timeslice window (in minutes) - The size of the timeslice window size.

Example: A 30 day rolling SLO defined with five minute slices has a total of 30*24*12 = 8640 slices. If the SLO target is 98%, we have a 100-98 = 2% error budget or 8640 * 0.02 = 172 bad slices available before we violate the SLO.

Set your time window

edit

Select the durations over which you want to compute your SLO. The time window uses the data from the defined rolling period. For example, the last 30 days.

Set your target/SLO (%)

edit

The SLO target objective in percentage.

Describe your SLO

edit

After setting your objectives, give your SLO a name, a short description, and add any relevant tags.

SLO burn rate alert rule

edit

When the Create an SLO burn rate alert rule checkbox is selected, the Create rule window opens immediately after you click the Create SLO button. Here you can define your SLO burn rate alert rule. For more information, see Create an SLO burn rate rule.