SSL/TLS input settings | Elastic Observability [8.13]

› › › ›

« SSL/TLS output settings Tail-based sampling »

SSL/TLS input settingsedit

These settings apply to SSL/TLS communication between the APM Server and APM Agents. See APM agent TLS communication to learn more.

Enable TLS in the APM integration settings and use the SSL/TLS input settings to set the path to the server certificate and key.

The following is a basic APM Server SSL config with secure communication enabled. This will make APM Server serve HTTPS requests instead of HTTP.

apm-server.ssl.enabled: true
apm-server.ssl.certificate: "/path/to/apm-server.crt"
apm-server.ssl.key: "/path/to/apm-server.key"

A full list of configuration options is available in SSL/TLS input settings.

If APM agents are authenticating themselves using a certificate that cannot be authenticated through known CAs (e.g. self signed certificates), use the ssl.certificate_authorities to set a custom CA. This will automatically modify the ssl.client_authentication configuration to require authentication.

Enable TLSedit

Enable or disable TLS. Disabled by default.

APM Server binary	`apm-server.ssl.enabled`
Fleet-managed	`Enable TLS`

File path to server certificateedit

The path to the file containing the certificate for Server authentication. Required if TLS is enabled.

APM Server binary	`apm-server.ssl.certificate`
Fleet-managed	`File path to server certificate`

File path to server certificate keyedit

The path to the file containing the Server certificate key. Required if TLS is enabled.

APM Server binary	`apm-server.ssl.key`
Fleet-managed	`File path to server certificate key`

Key passphraseedit

The passphrase used to decrypt an encrypted key stored in the configured apm-server.ssl.key file.

APM Server binary	`apm-server.ssl.key_passphrase`
Fleet-managed	N/A

Supported protocol versionsedit

This setting is a list of allowed protocol versions: SSLv3, TLSv1.0, TLSv1.1, TLSv1.2 and TLSv1.3. We do not recommend using SSLv3 or TLSv1.0. The default value is [TLSv1.1, TLSv1.2, TLSv1.3].

APM Server binary	`apm-server.ssl.supported_protocols`
Fleet-managed	`Supported protocol versions`

Cipher suites for TLS connectionsedit

The list of cipher suites to use. The first entry has the highest priority. If this option is omitted, the Go crypto library’s default suites are used (recommended). Note that TLS 1.3 cipher suites are not individually configurable in Go, so they are not included in this list.

APM Server binary	`apm-server.ssl.cipher_suites`
Fleet-managed	`Cipher suites for TLS connections`

The following cipher suites are available:

Cypher	Notes
ECDHE-ECDSA-AES-128-CBC-SHA
ECDHE-ECDSA-AES-128-CBC-SHA256	TLS 1.2 only. Disabled by default.
ECDHE-ECDSA-AES-128-GCM-SHA256	TLS 1.2 only.
ECDHE-ECDSA-AES-256-CBC-SHA
ECDHE-ECDSA-AES-256-GCM-SHA384	TLS 1.2 only.
ECDHE-ECDSA-CHACHA20-POLY1305	TLS 1.2 only.
ECDHE-ECDSA-RC4-128-SHA	Disabled by default. RC4 not recommended.
ECDHE-RSA-3DES-CBC3-SHA
ECDHE-RSA-AES-128-CBC-SHA
ECDHE-RSA-AES-128-CBC-SHA256	TLS 1.2 only. Disabled by default.
ECDHE-RSA-AES-128-GCM-SHA256	TLS 1.2 only.
ECDHE-RSA-AES-256-CBC-SHA
ECDHE-RSA-AES-256-GCM-SHA384	TLS 1.2 only.
ECDHE-RSA-CHACHA20-POLY1205	TLS 1.2 only.
ECDHE-RSA-RC4-128-SHA	Disabled by default. RC4 not recommended.
RSA-3DES-CBC3-SHA
RSA-AES-128-CBC-SHA
RSA-AES-128-CBC-SHA256	TLS 1.2 only. Disabled by default.
RSA-AES-128-GCM-SHA256	TLS 1.2 only.
RSA-AES-256-CBC-SHA
RSA-AES-256-GCM-SHA384	TLS 1.2 only.
RSA-RC4-128-SHA	Disabled by default. RC4 not recommended.

Here is a list of acronyms used in defining the cipher suites:

3DES: Cipher suites using triple DES
AES-128/256: Cipher suites using AES with 128/256-bit keys.
CBC: Cipher using Cipher Block Chaining as block cipher mode.
ECDHE: Cipher suites using Elliptic Curve Diffie-Hellman (DH) ephemeral key exchange.
ECDSA: Cipher suites using Elliptic Curve Digital Signature Algorithm for authentication.
GCM: Galois/Counter mode is used for symmetric key cryptography.
RC4: Cipher suites using RC4.
RSA: Cipher suites using RSA.
SHA, SHA256, SHA384: Cipher suites using SHA-1, SHA-256 or SHA-384.

Curve types for ECDHE based cipher suitesedit

The list of curve types for ECDHE (Elliptic Curve Diffie-Hellman ephemeral key exchange).

APM Server binary	`apm-server.ssl.curve_types`
Fleet-managed	`Curve types for ECDHE based cipher suites`

List of root certificates for verifying client certificatesedit

The list of root certificates for verifying client certificates. If certificate_authorities is empty or not set, the trusted certificate authorities of the host system are used. If certificate_authorities is set, client_authentication will be automatically set to required. Sending client certificates is currently only supported by the RUM agent through the browser, the Java agent (see Agent certificate authentication), and the Jaeger agent.

APM Server binary	`apm-server.ssl.certificate_authorities`
Fleet-managed	N/A

Client authenticationedit

This configures what types of client authentication are supported. The valid options are none, optional, and required. The default is none. If certificate_authorities has been specified, this setting will automatically change to required. This option only needs to be configured when the agent is expected to provide a client certificate. Sending client certificates is currently only supported by the RUM agent through the browser, the Java agent (see Agent certificate authentication), and the Jaeger agent.

none - Disables client authentication.
optional - When a client certificate is given, the server will verify it.
required - Requires clients to provide a valid certificate.

APM Server binary	`apm-server.ssl.client_authentication`
Fleet-managed	N/A

« SSL/TLS output settings Tail-based sampling »