Use the Synthetics CLI
@elastic/synthetics
Elastic uses the @elastic/synthetics library to run synthetic browser tests and report the test results. The library also provides a CLI to help you scaffold, develop/run tests locally, and push tests to Elastic.
npx @elastic/synthetics [options] [files] [dir]
You will not need to use most command line flags. However, there are some you may find useful:
--match <string>
Run tests with a name or tags that match the given glob pattern.
--tags Array<string>
Run tests with the given tags that match the given glob pattern.
--pattern <string>
RegExp pattern to match journey files in the current working directory. Defaults to
/*.journey.(ts|js)$/
, which matches files ending with.journey.ts
or.journey.js
.--params <jsonstring>
JSON object that defines any variables your tests require. Read more in Work with params and secrets.
Params passed will be merged with params defined in your
synthetics.config.js
file. Params defined via the CLI take precedence.--playwright-options <jsonstring>
JSON object to pass in custom Playwright options for the agent. For more details on relevant Playwright options, refer to the the configuration docs.
Options passed will be merged with Playwright options defined in your
synthetics.config.js
file. Options defined via the CLI take precedence.--screenshots <on|off|only-on-failure>
Control whether or not to capture screenshots at the end of each step. Options include
'on'
,'off'
, or'only-on-failure'
.This can also be set in the configuration file using
monitor.screenshot
. The value defined via the CLI will take precedence.-c, --config <string>
Path to the configuration file. By default, test runner looks for a
synthetics.config.(js|ts)
file in the current directory. Synthetics configuration provides options to configure how your tests are run and pushed to Elastic. Allowed options are described in the configuration file--reporter <json|junit|buildkite-cli|default>
One of
json
,junit
,buildkite-cli
, ordefault
. Use the JUnit or Buildkite reporter to provide easily parsed output to CI systems.--inline
Instead of reading from a file,
cat
inline scripted journeys and pipe them throughstdin
. For example,cat path/to/file.js | npx @elastic/synthetics --inline
.--no-throttling
Does not apply throttling.
Throttling can also be disabled in the configuration file using
monitor.throttling
. The value defined via the CLI will take precedence.Note
Network throttling for browser based monitors is disabled. See this documention for more details.
--no-headless
Runs with the browser in headful mode.
This is the same as setting Playwright's
headless
option tofalse
by running--playwright-options '{"headless": false}'
.Note
Headful mode should only be used locally to see the browser and interact with DOM elements directly for testing purposes. Do not attempt to run in headful mode when running through Elastic's global managed testing infrastructure or Private Locations as this is not supported.
-h, --help
Shows help for the
npx @elastic/synthetics
command.
Note
The --pattern
, --tags
, and --match
flags for filtering are only supported when you
run synthetic tests locally or push them to Elastic. Filtering is not supported in any other subcommands
like init
and locations
.
Note
For debugging synthetic tests locally, you can set an environment variable,
DEBUG=synthetics npx @elastic/synthetics
, to capture Synthetics agent logs.
@elastic/synthetics init
Scaffold a new Synthetics project using Elastic Synthetics.
This will create a template Node.js project that includes the synthetics agent, required dependencies, a synthetics configuration file, and example browser and lightweight monitor files. These files can be edited and then pushed to Elastic to create monitors.
npx @elastic/synthetics init <name-of-synthetics-project>
Read more about what's included in a template Synthetics project in Create a Synthetics project.
@elastic/synthetics push
Create monitors in by using your local journeys. By default, running
push
command will use the project
settings field from the synthetics.config.ts
file, which is set up using the init
command. However, you can override these
settings using the CLI flags.
SYNTHETICS_API_KEY=<api-key> npx @elastic/synthetics push --url <kibana-url> --id <id|name>
Note
The push
command includes interactive prompts to prevent you from accidentally deleting or duplicating monitors.
You will see a prompt when:
- You
push
a project that used to contain one or more monitors but either no longer contains previously running monitors or has any monitors. Selectyes
to delete the monitors associated with the project ID being pushed. - You
push
a Synthetics project that's already been pushed using one Synthetics project ID and then try topush
it using a different ID. Selectyes
to create duplicates of all monitors in the project. You can setDEBUG=synthetics
environment variable to capture the deleted monitors.
Note
If the journey contains external NPM packages other than the @elastic/synthetics
,
those packages will be bundled along with the journey code when the push
command is invoked.
However there are some limitations when using external packages:
- Bundled journeys after compression should not be more than 1500 Kilobytes.
- Native node modules will not work as expected due to platform inconsistency.
- Uploading files in journey scripts(via locator.setInputFiles) is not supported.
--auth <string>
API key used for authentication. You can also set the API key via the
SYNTHETICS_API_KEY
environment variable.To create an API key, you must be logged in as a user with Editor access.
--id <string>
A unique id associated with your Synthetics project. It will be used for logically grouping monitors.
If you used
init
to create a Synthetics project, this is the<name-of-synthetics-project>
you specified.This can also be set in the configuration file using
project.id
. The value defined via the CLI will take precedence.--url <string>
The URL for the Observability project to which you want to upload the monitors.
This can also be set in the configuration file using
project.url
. The value defined via the CLI will take precedence.--schedule <number>
The interval (in minutes) at which the monitor should run.
This can also be set in the configuration file using
monitor.schedule
. The value defined via the CLI will take precedence.--locations Array<SyntheticsLocationsType>
Where to deploy the monitor. Monitors can be deployed in multiple locations so that you can detect differences in availability and response times across those locations.
To list available locations, refer to
@elastic/synthetics locations
.This can also be set in the configuration file using
monitor.locations
in the configuration file. The value defined via the CLI will take precedence.--private-locations Array<string>
The Private Locations to which the monitors will be deployed. These Private Locations refer to locations hosted and managed by you, whereas
locations
are hosted by Elastic. You can specify a Private Location using the location's name.To list available Private Locations, refer to
@elastic/synthetics locations
.This can also be set in the configuration file using
monitor.privateLocations
in the configuration file. The value defined via the CLI will take precedence.--fields <string>
A list of key-value pairs that will be sent with each monitor event. The
fields
are appended to Elasticsearch documents aslabels
, and those labels are displayed in Kibana in the Monitor details panel in the individual monitor's Overview tab.Example:
--fields '{ "foo": bar", "team": "synthetics" }'
This can also be set in the configuration file using the
monitor.fields
option. The value defined via the CLI will take precedence.--yes
The
push
command includes interactive prompts to prevent you from accidentally deleting or duplicating monitors. If running the CLI non-interactively, you can override these prompts using the--yes
option. When the--yes
option is passed topush
:-
If you
push
a Synthetics project that used to contain one or more monitors but no longer contains any monitors, all monitors associated with the Synthetics project ID being pushed will be deleted. -
If you
push
a Synthetics project that's already been pushed using one Synthetics project ID and then try topush
it using a different ID, it will create duplicates of all monitors in the Synthetics project.
-
Tag monitors
Synthetics journeys can be tagged with one or more tags. Use tags to filter journeys when running tests locally or pushing them to Elastic.
To add tags to a single journey, add the tags
parameter to the journey
function or
use the monitor.use
method.
import {journey, monitor} from "@elastic/synthetics";
journey({name: "example journey", tags: ["env:qa"] }, ({ page }) => {
monitor.use({
tags: ["env:qa"]
})
// Add steps here
});
For lightweight monitors, use the tags
field in the yaml configuration file.
name: example monitor
tags:
- env:qa
To apply tags to all browser and lightweight monitors, configure using the monitor.tags
field in the synthetics.config.ts
file.
Filter monitors
When running the npx @elastic/synthetics push
command, you can filter the monitors that are pushed to Elastic using the following flags:
--tags Array<string>
Push monitors with the given tags that match the glob pattern.
--match <string>
Push monitors with a name or tags that match the glob pattern.
--pattern <string>
RegExp pattern to match the journey files in the current working directory. Defaults to
/*.journey.(ts|js)$/
for browser monitors and/.(yml|yaml)$/
for lightweight monitors.
You can combine these techniques and push the monitors to different projects based on the tags by using multiple configuration files.
npx @elastic/synthetics push --config synthetics.qa.config.ts --tags env:qa
npx @elastic/synthetics push --config synthetics.prod.config.ts --tags env:prod
@elastic/synthetics locations
List all available locations for running synthetics monitors.
npx @elastic/synthetics locations --url <observability-project-host> --auth <api-key>
Run npx @elastic/synthetics locations
with no flags to list all the available global locations managed by Elastic for running synthetics monitors.
To list both locations on Elastic's global managed infrastructure and Private Locations, include:
--url <string>
The URL for the Observability project from which to fetch all available public and Private Locations.
--auth <string>
API key used for authentication.