All methods and paths for this operation:
For data streams, the API retrieves statistics for the stream's backing indices.
By default, the returned statistics are index-level with primaries and total aggregations.
primaries are the values for only the primary shards.
total are the accumulated values for both primary and replica shards.
To get shard-level statistics, set the level parameter to shards.
NOTE: When moving to another node, the shard-level statistics for a shard are cleared. Although the shard is no longer part of the node, that node retains any node-level statistics to which the shard contributed.
monitorA comma-separated list of index names; use _all or empty string to perform the operation on all indices
Limit the information returned the specific metrics.
Comma-separated list or wildcard expressions of fields to include in fielddata and suggest statistics.
Type of index that wildcard patterns can match. If the request can target data streams, this argument
determines whether wildcard expressions match hidden data streams. Supports comma-separated values,
such as open,hidden.
Supported values include:
all: Match any data stream or index, including hidden ones.open: Match open, non-hidden indices. Also matches any non-hidden data stream.closed: Match closed, non-hidden indices. Also matches any non-hidden data stream. Data streams cannot be closed.hidden: Match hidden data streams and hidden indices. Must be combined with open, closed, or both.none: Wildcard expressions are not accepted.Values are all, open, closed, hidden, or none.
Comma-separated list or wildcard expressions of fields to include in fielddata statistics.
Comma-separated list or wildcard expressions of fields to include in the statistics.
If true, statistics are not collected from closed indices.
Comma-separated list of search groups to include in the search statistics.
If true, the call reports the aggregated disk usage of each one of the Lucene index files (only applies if segment stats are requested).
If true, the response includes information from segments that are not loaded into memory.
Indicates whether statistics are aggregated at the cluster, index, or shard level.
Values are cluster, indices, or shards.
Total number of non-deleted documents across all primary shards assigned to selected nodes. This number is based on documents in Lucene segments and may include documents from nested fields.
Total number of deleted documents across all primary shards assigned to selected nodes. This number is based on documents in Lucene segments. Elasticsearch reclaims the disk space of deleted Lucene documents when a segment is merged.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Total number of entries added to the query cache across all shards assigned to selected nodes. This number includes current and evicted entries.
Total number of entries currently in the query cache across all shards assigned to selected nodes.
Total number of query cache evictions across all shards assigned to selected nodes.
Total count of query cache hits across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for the query cache across all shards assigned to selected nodes.
Total count of query cache misses across all shards assigned to selected nodes.
Total count of hits and misses in the query cache across all shards assigned to selected nodes.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Total number of segments across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for doc values across all shards assigned to selected nodes.
This object is not populated by the cluster stats API. To get information on segment files, use the node stats API.
Total amount of memory, in bytes, used by fixed bit sets across all shards assigned to selected nodes.
Total amount, in bytes, of memory used by all index writers across all shards assigned to selected nodes.
Unix timestamp, in milliseconds, of the most recently retried indexing request.
Total amount, in bytes, of memory used for segments across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for normalization factors across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for points across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for stored fields across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for terms across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for term vectors across all shards assigned to selected nodes.
Total amount, in bytes, of memory used by all version maps across all shards assigned to selected nodes.
Total size, in bytes, of all shards assigned to selected nodes.
A prediction, in bytes, of how much larger the shard stores will eventually grow due to ongoing peer recoveries, restoring snapshots, and similar activities.
Total data set size, in bytes, of all shards assigned to selected nodes. This includes the size of shards not stored fully on the nodes, such as the cache for partially mounted indices.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Total number of non-deleted documents across all primary shards assigned to selected nodes. This number is based on documents in Lucene segments and may include documents from nested fields.
Total number of deleted documents across all primary shards assigned to selected nodes. This number is based on documents in Lucene segments. Elasticsearch reclaims the disk space of deleted Lucene documents when a segment is merged.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Total number of entries added to the query cache across all shards assigned to selected nodes. This number includes current and evicted entries.
Total number of entries currently in the query cache across all shards assigned to selected nodes.
Total number of query cache evictions across all shards assigned to selected nodes.
Total count of query cache hits across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for the query cache across all shards assigned to selected nodes.
Total count of query cache misses across all shards assigned to selected nodes.
Total count of hits and misses in the query cache across all shards assigned to selected nodes.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Total number of segments across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for doc values across all shards assigned to selected nodes.
This object is not populated by the cluster stats API. To get information on segment files, use the node stats API.
Total amount of memory, in bytes, used by fixed bit sets across all shards assigned to selected nodes.
Total amount, in bytes, of memory used by all index writers across all shards assigned to selected nodes.
Unix timestamp, in milliseconds, of the most recently retried indexing request.
Total amount, in bytes, of memory used for segments across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for normalization factors across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for points across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for stored fields across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for terms across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for term vectors across all shards assigned to selected nodes.
Total amount, in bytes, of memory used by all version maps across all shards assigned to selected nodes.
Total size, in bytes, of all shards assigned to selected nodes.
A prediction, in bytes, of how much larger the shard stores will eventually grow due to ongoing peer recoveries, restoring snapshots, and similar activities.
Total data set size, in bytes, of all shards assigned to selected nodes. This includes the size of shards not stored fully on the nodes, such as the cache for partially mounted indices.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Values are green, GREEN, yellow, YELLOW, red, or RED.
Values are open or close.
Cause and details about a request failure. This class defines the properties common to all error types. Additional details are also provided, that depend on the error type.
The type of error
The server stack trace. Present only if the error_trace=true parameter was sent with the request.
Cause and details about a request failure. This class defines the properties common to all error types. Additional details are also provided, that depend on the error type.
Cause and details about a request failure. This class defines the properties common to all error types. Additional details are also provided, that depend on the error type.
Cause and details about a request failure. This class defines the properties common to all error types. Additional details are also provided, that depend on the error type.
Cause and details about a request failure. This class defines the properties common to all error types. Additional details are also provided, that depend on the error type.
Cause and details about a request failure. This class defines the properties common to all error types. Additional details are also provided, that depend on the error type.
Total number of non-deleted documents across all primary shards assigned to selected nodes. This number is based on documents in Lucene segments and may include documents from nested fields.
Total number of deleted documents across all primary shards assigned to selected nodes. This number is based on documents in Lucene segments. Elasticsearch reclaims the disk space of deleted Lucene documents when a segment is merged.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Total number of entries added to the query cache across all shards assigned to selected nodes. This number includes current and evicted entries.
Total number of entries currently in the query cache across all shards assigned to selected nodes.
Total number of query cache evictions across all shards assigned to selected nodes.
Total count of query cache hits across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for the query cache across all shards assigned to selected nodes.
Total count of query cache misses across all shards assigned to selected nodes.
Total count of hits and misses in the query cache across all shards assigned to selected nodes.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Total number of segments across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for doc values across all shards assigned to selected nodes.
This object is not populated by the cluster stats API. To get information on segment files, use the node stats API.
Total amount of memory, in bytes, used by fixed bit sets across all shards assigned to selected nodes.
Total amount, in bytes, of memory used by all index writers across all shards assigned to selected nodes.
Unix timestamp, in milliseconds, of the most recently retried indexing request.
Total amount, in bytes, of memory used for segments across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for normalization factors across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for points across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for stored fields across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for terms across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for term vectors across all shards assigned to selected nodes.
Total amount, in bytes, of memory used by all version maps across all shards assigned to selected nodes.
Total size, in bytes, of all shards assigned to selected nodes.
A prediction, in bytes, of how much larger the shard stores will eventually grow due to ongoing peer recoveries, restoring snapshots, and similar activities.
Total data set size, in bytes, of all shards assigned to selected nodes. This includes the size of shards not stored fully on the nodes, such as the cache for partially mounted indices.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Total number of non-deleted documents across all primary shards assigned to selected nodes. This number is based on documents in Lucene segments and may include documents from nested fields.
Total number of deleted documents across all primary shards assigned to selected nodes. This number is based on documents in Lucene segments. Elasticsearch reclaims the disk space of deleted Lucene documents when a segment is merged.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Total number of segments across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for doc values across all shards assigned to selected nodes.
This object is not populated by the cluster stats API. To get information on segment files, use the node stats API.
Total amount of memory, in bytes, used by fixed bit sets across all shards assigned to selected nodes.
Total amount, in bytes, of memory used by all index writers across all shards assigned to selected nodes.
Unix timestamp, in milliseconds, of the most recently retried indexing request.
Total amount, in bytes, of memory used for segments across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for normalization factors across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for points across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for stored fields across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for terms across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for term vectors across all shards assigned to selected nodes.
Total amount, in bytes, of memory used by all version maps across all shards assigned to selected nodes.
Total size, in bytes, of all shards assigned to selected nodes.
A prediction, in bytes, of how much larger the shard stores will eventually grow due to ongoing peer recoveries, restoring snapshots, and similar activities.
Total data set size, in bytes, of all shards assigned to selected nodes. This includes the size of shards not stored fully on the nodes, such as the cache for partially mounted indices.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Total number of non-deleted documents across all primary shards assigned to selected nodes. This number is based on documents in Lucene segments and may include documents from nested fields.
Total number of deleted documents across all primary shards assigned to selected nodes. This number is based on documents in Lucene segments. Elasticsearch reclaims the disk space of deleted Lucene documents when a segment is merged.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Total number of entries added to the query cache across all shards assigned to selected nodes. This number includes current and evicted entries.
Total number of entries currently in the query cache across all shards assigned to selected nodes.
Total number of query cache evictions across all shards assigned to selected nodes.
Total count of query cache hits across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for the query cache across all shards assigned to selected nodes.
Total count of query cache misses across all shards assigned to selected nodes.
Total count of hits and misses in the query cache across all shards assigned to selected nodes.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Total number of segments across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for doc values across all shards assigned to selected nodes.
This object is not populated by the cluster stats API. To get information on segment files, use the node stats API.
Total amount of memory, in bytes, used by fixed bit sets across all shards assigned to selected nodes.
Total amount, in bytes, of memory used by all index writers across all shards assigned to selected nodes.
Unix timestamp, in milliseconds, of the most recently retried indexing request.
Total amount, in bytes, of memory used for segments across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for normalization factors across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for points across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for stored fields across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for terms across all shards assigned to selected nodes.
Total amount, in bytes, of memory used for term vectors across all shards assigned to selected nodes.
Total amount, in bytes, of memory used by all version maps across all shards assigned to selected nodes.
Total size, in bytes, of all shards assigned to selected nodes.
A prediction, in bytes, of how much larger the shard stores will eventually grow due to ongoing peer recoveries, restoring snapshots, and similar activities.
Total data set size, in bytes, of all shards assigned to selected nodes. This includes the size of shards not stored fully on the nodes, such as the cache for partially mounted indices.
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and
d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.
Time unit for milliseconds
Values are green, GREEN, yellow, YELLOW, red, or RED.
Values are open or close.
GET _stats/fielddata?human&fields=my_join_field#question
resp = client.indices.stats(
metric="fielddata",
human=True,
fields="my_join_field",
)const response = await client.indices.stats({
metric: "fielddata",
human: "true",
fields: "my_join_field",
});response = client.indices.stats(
metric: "fielddata",
human: "true",
fields: "my_join_field"
)$resp = $client->indices()->stats([
"metric" => "fielddata",
"human" => "true",
"fields" => "my_join_field",
]);curl -X GET -H "Authorization: ApiKey $ELASTIC_API_KEY" "$ELASTICSEARCH_URL/_stats/fielddata?human&fields=my_join_field#question"