Get index recovery information Generally available

GET /{index}/_recovery
Api key auth Basic auth Bearer auth

All methods and paths for this operation:

GET /_recovery

GET /{index}/_recovery

Get information about ongoing and completed shard recoveries for one or more indices. For data streams, the API returns information for the stream's backing indices.

All recoveries, whether ongoing or complete, are kept in the cluster state and may be reported on at any time.

Shard recovery is the process of initializing a shard copy, such as restoring a primary shard from a snapshot or creating a replica shard from a primary shard. When a shard recovery completes, the recovered shard is available for search and indexing.

Recovery automatically occurs during the following processes:

  • When creating an index for the first time.
  • When a node rejoins the cluster and starts up any missing primary shard copies using the data that it holds in its data path.
  • Creation of new replica shard copies from the primary.
  • Relocation of a shard copy to a different node in the same cluster.
  • A snapshot restore operation.
  • A clone, shrink, or split operation.

You can determine the cause of a shard recovery using the recovery or cat recovery APIs.

The index recovery API reports information about completed recoveries only for shard copies that currently exist in the cluster. It only reports the last recovery for each shard copy and does not report historical information about earlier recoveries, nor does it report information about the recoveries of shard copies that no longer exist. This means that if a shard copy completes a recovery and then Elasticsearch relocates it onto a different node then the information about the original recovery will not be shown in the recovery API.

Required authorization

  • Index privileges: monitor

Path parameters

  • index string | array[string] Required

    Comma-separated list of data streams, indices, and aliases used to limit the request. Supports wildcards (*). To target all data streams and indices, omit this parameter or use * or _all.

Query parameters

  • active_only boolean

    If true, the response only includes ongoing shard recoveries.

  • detailed boolean

    If true, the response includes detailed information about shard recoveries.

Responses

  • 200 application/json
    Hide response attribute Show response attribute object
    • * object Additional properties
      Hide * attribute Show * attribute object
      • shards array[object] Required
        Hide shards attributes Show shards attributes object
        • id number Required
        • index object Required
          Hide index attributes Show index attributes object
          • bytes object
            Hide bytes attributes Show bytes attributes object
            • percent
            • recovered
            • recovered_in_bytes
            • recovered_from_snapshot
            • recovered_from_snapshot_in_bytes
            • reused
            • reused_in_bytes
            • total
            • total_in_bytes
          • files object Required
            Hide files attributes Show files attributes object
            • details array[object]
            • percent
            • recovered number Required
            • reused number Required
            • total number Required
          • size object Required
            Hide size attributes Show size attributes object
            • percent
            • recovered
            • recovered_in_bytes
            • recovered_from_snapshot
            • recovered_from_snapshot_in_bytes
            • reused
            • reused_in_bytes
            • total
            • total_in_bytes
          • source_throttle_time string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • source_throttle_time_in_millis number

            Time unit for milliseconds

          • target_throttle_time string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • target_throttle_time_in_millis number

            Time unit for milliseconds

          • total_time string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • total_time_in_millis number

            Time unit for milliseconds

        • primary boolean Required
        • source object Required
          Hide source attributes Show source attributes object
          • hostname string
          • host string
          • transport_address string
          • id string
          • ip string
          • name string
          • bootstrap_new_history_uuid boolean
          • repository string
          • snapshot string
          • version string
          • restoreUUID string
          • index string
        • stage string Required
        • start object
          Hide start attributes Show start attributes object
          • check_index_time string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • check_index_time_in_millis number

            Time unit for milliseconds

          • total_time string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • total_time_in_millis number

            Time unit for milliseconds

        • start_time string | number

          A date and time, either as a string whose format can depend on the context (defaulting to ISO 8601), or a number of milliseconds since the Epoch. Elasticsearch accepts both as input, but will generally output a string representation.

          One of:
          string-1 string UnitMillis number

          Time unit for milliseconds

        • start_time_in_millis number

          Time unit for milliseconds

        • stop_time string | number

          A date and time, either as a string whose format can depend on the context (defaulting to ISO 8601), or a number of milliseconds since the Epoch. Elasticsearch accepts both as input, but will generally output a string representation.

          One of:
          string-1 string UnitMillis number

          Time unit for milliseconds

        • stop_time_in_millis number

          Time unit for milliseconds

        • target object Required
          Hide target attributes Show target attributes object
          • hostname string
          • host string
          • transport_address string
          • id string
          • ip string
          • name string
          • bootstrap_new_history_uuid boolean
          • repository string
          • snapshot string
          • version string
          • restoreUUID string
          • index string
        • total_time string

          A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

        • total_time_in_millis number

          Time unit for milliseconds

        • translog object Required
          Hide translog attributes Show translog attributes object

          • percent string | number Required

            One of:
            string-1 string number-2 number
          • recovered number Required
          • total number Required
          • total_on_start number Required
          • total_time string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • total_time_in_millis number

            Time unit for milliseconds

        • type string Required
        • verify_index object Required
          Hide verify_index attributes Show verify_index attributes object
          • check_index_time string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • check_index_time_in_millis number

            Time unit for milliseconds

          • total_time string

            A duration. Units can be nanos, micros, ms (milliseconds), s (seconds), m (minutes), h (hours) and d (days). Also accepts "0" without a unit and "-1" to indicate an unspecified value.

          • total_time_in_millis number

            Time unit for milliseconds
GET /{index}/_recovery 
GET /_recovery?human

resp = client.indices.recovery(
    human=True,
)
const response = await client.indices.recovery({
  human: "true",
});
response = client.indices.recovery(
  human: "true"
)
$resp = $client->indices()->recovery([
    "human" => "true",
]);
curl -X GET -H "Authorization: ApiKey $ELASTIC_API_KEY" "$ELASTICSEARCH_URL/_recovery?human"
Response examples (200)
A successful response from `GET /_recovery?human`, which gets information about ongoing and completed shard recoveries for all data streams and indices in a cluster. This example includes information about a single index recovering a single shard. The source of the recovery is a snapshot repository and the target of the recovery is the `my_es_node` node. The response also includes the number and percentage of files and bytes recovered. 
{
  "index1" : {
    "shards" : [ {
      "id" : 0,
      "type" : "SNAPSHOT",
      "stage" : "INDEX",
      "primary" : true,
      "start_time" : "2014-02-24T12:15:59.716",
      "start_time_in_millis": 1393244159716,
      "stop_time" : "0s",
      "stop_time_in_millis" : 0,
      "total_time" : "2.9m",
      "total_time_in_millis" : 175576,
      "source" : {
        "repository" : "my_repository",
        "snapshot" : "my_snapshot",
        "index" : "index1",
        "version" : "{version}",
        "restoreUUID": "PDh1ZAOaRbiGIVtCvZOMww"
      },
      "target" : {
        "id" : "ryqJ5lO5S4-lSFbGntkEkg",
        "host" : "my.fqdn",
        "transport_address" : "my.fqdn",
        "ip" : "10.0.1.7",
        "name" : "my_es_node"
      },
      "index" : {
        "size" : {
          "total" : "75.4mb",
          "total_in_bytes" : 79063092,
          "reused" : "0b",
          "reused_in_bytes" : 0,
          "recovered" : "65.7mb",
          "recovered_in_bytes" : 68891939,
          "recovered_from_snapshot" : "0b",
          "recovered_from_snapshot_in_bytes" : 0,
          "percent" : "87.1%"
        },
        "files" : {
          "total" : 73,
          "reused" : 0,
          "recovered" : 69,
          "percent" : "94.5%"
        },
        "total_time" : "0s",
        "total_time_in_millis" : 0,
        "source_throttle_time" : "0s",
        "source_throttle_time_in_millis" : 0,
        "target_throttle_time" : "0s",
        "target_throttle_time_in_millis" : 0
      },
      "translog" : {
        "recovered" : 0,
        "total" : 0,
        "percent" : "100.0%",
        "total_on_start" : 0,
        "total_time" : "0s",
        "total_time_in_millis" : 0
      },
      "verify_index" : {
        "check_index_time" : "0s",
        "check_index_time_in_millis" : 0,
        "total_time" : "0s",
        "total_time_in_millis" : 0
      }
    } ]
  }
}
A successful response from `GET _recovery?human&detailed=true`. The response includes a listing of any physical files recovered and their sizes. The response also includes timings in milliseconds of the various stages of recovery: index retrieval, translog replay, and index start time. This response indicates the recovery is done. 
{
  "index1" : {
    "shards" : [ {
      "id" : 0,
      "type" : "EXISTING_STORE",
      "stage" : "DONE",
      "primary" : true,
      "start_time" : "2014-02-24T12:38:06.349",
      "start_time_in_millis" : "1393245486349",
      "stop_time" : "2014-02-24T12:38:08.464",
      "stop_time_in_millis" : "1393245488464",
      "total_time" : "2.1s",
      "total_time_in_millis" : 2115,
      "source" : {
        "id" : "RGMdRc-yQWWKIBM4DGvwqQ",
        "host" : "my.fqdn",
        "transport_address" : "my.fqdn",
        "ip" : "10.0.1.7",
        "name" : "my_es_node"
      },
      "target" : {
        "id" : "RGMdRc-yQWWKIBM4DGvwqQ",
        "host" : "my.fqdn",
        "transport_address" : "my.fqdn",
        "ip" : "10.0.1.7",
        "name" : "my_es_node"
      },
      "index" : {
        "size" : {
          "total" : "24.7mb",
          "total_in_bytes" : 26001617,
          "reused" : "24.7mb",
          "reused_in_bytes" : 26001617,
          "recovered" : "0b",
          "recovered_in_bytes" : 0,
          "recovered_from_snapshot" : "0b",
          "recovered_from_snapshot_in_bytes" : 0,
          "percent" : "100.0%"
        },
        "files" : {
          "total" : 26,
          "reused" : 26,
          "recovered" : 0,
          "percent" : "100.0%",
          "details" : [ {
            "name" : "segments.gen",
            "length" : 20,
            "recovered" : 20
          }, {
            "name" : "_0.cfs",
            "length" : 135306,
            "recovered" : 135306,
            "recovered_from_snapshot": 0
          }, {
            "name" : "segments_2",
            "length" : 251,
            "recovered" : 251,
            "recovered_from_snapshot": 0
          }
          ]
        },
        "total_time" : "2ms",
        "total_time_in_millis" : 2,
        "source_throttle_time" : "0s",
        "source_throttle_time_in_millis" : 0,
        "target_throttle_time" : "0s",
        "target_throttle_time_in_millis" : 0
      },
      "translog" : {
        "recovered" : 71,
        "total" : 0,
        "percent" : "100.0%",
        "total_on_start" : 0,
        "total_time" : "2.0s",
        "total_time_in_millis" : 2025
      },
      "verify_index" : {
        "check_index_time" : 0,
        "check_index_time_in_millis" : 0,
        "total_time" : "88ms",
        "total_time_in_millis" : 88
      }
    } ]
  }
}