HTTP options
editHTTP options
editAlso see Common monitor options.
The options described here configure Heartbeat to connect via HTTP and optionally verify that the host returns the expected response.
Example configuration:
- type: http id: myhost name: My HTTP Host schedule: '@every 5s' hosts: ["http://myhost:80"]
hosts
editA list of URLs to ping.
max_redirects
editThe total number of redirections Heartbeat will follow. Defaults to 0, meaning heartbeat will not follow redirects, but will report the status of the redirect. If set to a number greater than 0 heartbeat will follow that number of redirects.
When this option is set to a value greater than zero the monitor.ip
field will no longer be reported, as multiple
DNS requests across multiple IPs may return multiple IPs. Fine grained network timing data will also not be recorded, as with redirects
that data will span multiple requests. Specifically the fields http.rtt.content.us
, http.rtt.response_header.us
,
http.rtt.total.us
, http.rtt.validate.us
, http.rtt.write_request.us
and dns.rtt.us
will be omitted.
proxy_url
editThe HTTP proxy URL. This setting is optional. Example http://proxy.mydomain.com:3128
username
editThe username for authenticating with the server. The credentials are passed with the request. This setting is optional.
You need to specify credentials when your check.response
settings require it.
For example, you can check for a 403 response (check.response.status: [403]
)
without setting credentials.
password
editThe password for authenticating with the server. This setting is optional.
ssl
editThe TLS/SSL connection settings for use with the HTTPS endpoint. If you don’t specify settings, the system defaults are used.
Example configuration:
- type: http id: my-http-service name: My HTTP Service hosts: ["https://myhost:443"] schedule: '@every 5s' ssl: certificate_authorities: ['/etc/ca.crt'] supported_protocols: ["TLSv1.0", "TLSv1.1", "TLSv1.2"]
Also see SSL for a full description of the ssl
options.
response
editControls the indexing of the HTTP response body contents to the http.response.body.contents
field.
Set response.include_body
to one of the options listed below.
-
on_error
- Include the body if an error is encountered during the check. This is the default.
-
never
- Never include the body.
-
always
- Always include the body with checks.
Set response.include_body_max_bytes
to control the maximum size of the stored body contents. Defaults to 1024 bytes.
check
editAn optional request
to send to the remote host and the expected response
.
Example configuration:
- type: http id: my-http-host name: My HTTP Service hosts: ["http://myhost:80"] check.request.method: HEAD check.response.status: [200] schedule: '@every 5s'
Under check.request
, specify these options:
-
method
-
The HTTP method to use. Valid values are
"HEAD"
,"GET"
and"POST"
. -
headers
- A dictionary of additional HTTP headers to send. By default heartbeat will set the User-Agent header to identify itself.
-
body
- Optional request body content.
Example configuration:
This monitor POSTs an x-www-form-urlencoded
string
to the endpoint /demo/add
- type: http id: demo-service name: Demo Service schedule: '@every 5s' urls: ["http://localhost:8080/demo/add"] check.request: method: POST headers: 'Content-Type': 'application/x-www-form-urlencoded' # urlencode the body: body: "name=first&email=someemail%40someemailprovider.com" check.response: status: [200] body: - Saved - saved
Under check.response
, specify these options:
-
status
-
A list of expected status codes. 4xx and 5xx codes are considered
down
by default. Other codes are consideredup
. -
headers
- The required response headers.
-
body
- A list of regular expressions to match the the body output. Only a single expression needs to match. HTTP response bodies of up to 100MiB are supported.
Example configuration:
This monitor examines the
response body for the strings saved
or Saved
and expects 200 or 201 status codes
- type: http id: demo-service name: Demo Service schedule: '@every 5s' urls: ["http://localhost:8080/demo/add"] check.request: method: POST headers: 'Content-Type': 'application/x-www-form-urlencoded' # urlencode the body: body: "name=first&email=someemail%40someemailprovider.com" check.response: status: [200, 201] body: - Saved - saved
-
json
- A list of condition expressions executed against the body when parsed as JSON. Body sizes must be less than or equal to 100 MiB.
The following configuration shows how to check the response when the body contains JSON:
- type: http id: demo-service name: Demo Service schedule: '@every 5s' hosts: ["https://myhost:80"] check.request: method: GET headers: 'X-API-Key': '12345-mykey-67890' check.response: status: [200] json: - description: check status condition: equals: status: ok
The following configuration shows how to check the response for multiple regex patterns:
- type: http id: demo-service name: Demo Service schedule: '@every 5s' hosts: ["https://myhost:80"] check.request: method: GET headers: 'X-API-Key': '12345-mykey-67890' check.response: status: [200] body: - hello - world
The following configuration shows how to check the response with a multiline regex:
- type: http id: demo-service name: Demo Service schedule: '@every 5s' hosts: ["https://myhost:80"] check.request: method: GET headers: 'X-API-Key': '12345-mykey-67890' check.response: status: [200] body: '(?s)first.*second.*third'